How to Remove Write Protection on Windows 10?

No doubt, we are using USB drives and SD cards to transfer the data from the computers. While transferring or storing the data, some users have to face write protection errors. Due to this error, you may have to encounter some problems. For example, viruses can attack USB drives and SD cards. To eliminate these viruses, you will have to use antivirus software. If you are facing this error in the USB drive or SD card, you may not transfer or store the data. Under such a situation, you will have to remove write protection on windows 10. Here, we will discuss three different ways to remove write protection on windows 10.

Solution 1

First of all, you can remove write protection on Windows 10 by using CMD. For this reason, you will have to press Windows Key + X by using your keyboard. It will show the menu and you will have to select the command prompt from the menu. Here, you will have to type diskpart. After writing it, you will have to press the Enter button. Now, you should type the list disk and press the Enter button. To select the write-protected disk, you will have to type select disk. After selecting the write-protected disk, you should press the ‘Enter’ button.

Now, you will have to change the disk properties. For this reason, you can type attributes disk clear read-only. When you will press the ‘Enter’ button, it will not remain read-only. Now, you will have to type ‘Exit’. When you will press the ‘Enter’ button twice, it will exit the ‘Command Prompt’ and ‘Diskpart’. When you will follow these steps, you can remove write protection on Windows 10. To check it, you should re-plug the USB drive. You will observe that the write-protection error has been removed from the disk.

Solution 2

You can also remove write protection on Windows 10 by editing the registry. To remove write protection by editing the registry, you will have to follow some essential steps. First of all, you will have to open the Run dialogue by pressing Windows Key + R. After that, you will have to open the Registry Editor. To open the Registry Editor, you can press the ‘Enter’ button. Now, you will have to expand the entries on the left-hand pane. When you will open the Control key by right-clicking, you will see the ‘New’ option. After moving the cursor on this option, you should click on the ‘Key’.

Here, you can give a name to the ‘Storage Device Policies’. You should click on the newly created key by right-clicking on the white space. When you will click on ‘New’, you can see the ‘DWORD’ value. Here, you will have to find ‘Write Protect’. When you will double click on the newly created DWORD value, it will show the value data. You should change its value from ‘1’ to ‘0’. To apply this change, you will have to click on the ‘OK button. Now, you should close the Registry Editor. When you will restart your computer, you will observe that write protection has been removed from the computer.

Solution 3

Sometimes, you can’t remove write protection on Windows 10 by following the above-mentioned techniques. Under such a situation, you can remove write protection on Windows 10 by using freeware. Here, you will have to use the last resort to remove it. It is formatting the disk. Before formatting the disk, you should know that your data will be destroyed. Therefore, you should create a backup of all the important files and data. Here, you will have to follow some essential steps. First of all, you should download and install the AOMEI Partition Assistant.

After downloading and installing, you should right-click on the disk drive that you want to format. After selecting this drive, you should click on ‘Format Partition’. It will show a new pop-up window. By using the ‘Partition Label’, you should name the USB drive. It allows the users to change the file names based on their needs. If you want to continue this process, you will have to click on the ‘OK’ button. You will see it in the pending operation. If you want to completely remove it, you will have to confirm the ‘Pending Operations’. For the execution of these operations, you will have to click on the ‘Apply’ button.

Solution 4

Sometimes, we have to use BitLocker to protect the files. For the protection of the files, it is using encryption features. Therefore, you should easily enable it on your hard drive partition. If you are also using BitLocker, first of all, you will have to remove the protection from it. To remove write protection on Windows 10, you will have to follow some essential steps. First of all, you should open File Explorer on your computer. Here, you will have to find the BitLocker partition.

After finding this partition, you should open it by right-clicking on it. After that, you should choose Manage BitLocker. Now, you will have to select the partition. Here, you can turn off the partition. When you will do it, your BitLocker will start to decrypt the files. When you will follow all the steps, you can easily manage the data on the hard drive. Moreover, you can also save new files on this drive. Sometimes, you can’t remove write protection due to the physical switch. By moving the physical switch, you can easily remove it.

Conclusion

It is a fact that we can use USB drives and SD cards to transfer and store the data. To store the data on the USB drives and SD cards, we have to format the already existed data. Sometimes, we can easily format the data on Windows 10. In some cases, it shows a message of write protection. As a result, we can’t format the data on Windows 10. If you are also facing this problem, you should remove write protection on Windows 10. There are various ways to remove it. For example, you can remove it by using CMD. You can also remove it by using the Registry option in Windows 10. By using Disport, we can also remove it.

Author Bio:

Robert Fawl is a professional Content Writer based in London, UK. He is an author and blogger with experience in writing different academic assignments. If you need dissertation writers to write your dissertation, you can contact him.