EPOMAKER TK68

65% Hot Swappable 2.4Ghz/Bluetooth/USB-C Wired/Wireless Keyboard

  • ANSI layout, 65% Keyboard with Shine-through Pudding Keycaps
  • Type-C Wired, Bluetooth 5.0 & 2.4GHz Wireless Modes Available
  • Gasket-Mounted & PC Plate
  • Hot Swappable 3/5Pin Mechanical Switches
Category: Tag:

Description

68 KEYS 65% COMPACT LAYOUT

EPOMAKER TK68 custom triple modes mechanical keyboard is designed in a favored compact 65% layout to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and TK68 will surely beyond your expectation with the hot swappable socket and programmable software, amazing RGB backlights.

A GASKET-MOUNTED MECHANICAL KEYBOARD

Gasket mounting is a type of keyboard mounting, where no screw holes are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. Thus, EPOMAKER TK68 will be a good choice if you prefer a softer long period typing.

THREE MODES OF CONNECTIVITY: BLUETOOTH 5.0 & 2.4GHZ & TYPE-C CABLE

Equipped with a 2500mAh large capacity battery, this keyboard supports wireless and wired connections. By the wireless option, either Bluetooth (up to 5.0) or 2.4GHz can be chosen. By the wired mode, macro can be programmed to better fit your typing habits. The modes can be easily switched by Fn+Q/W/E(Bluetooth) / R(2.4GHz) / T(USB Wired).

HOT SWAPPABLE PCB, COMPATIBLE WITH 3PIN/5PIN SWITCH

EPOMAKER TK68 keyboard is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX switches and its clones.

ACRYLIC TRANSLUCENT CASE & PUDDING PBT KEYCAPS

RGB backlight is always considered as one of the important elements for mechanical keyboards so we add a few twist to TK68 keyboard. Apart from a double shot pudding keycaps set to shine through the RGB backlight, we also adopt transparent/translucent case and a circle of bottom RGB lights to maximally show off the lights. The keyboard will be fully surrounded by amazing RGB effects.

TECHNICAL SPECIFICATIONS

Model
EPOMAKER TK68
Layout
65%, 68 Keys
Switch
Mechanical Switches
Keycap
Shine-through Pudding Keycaps
Case Material
Acrylic
Plate Material
PC
Hot-swap
Yes, 3/5 pins
Stabilizer Type
Plate-mounted
Backlit
RGB
Connectivity
Bluetooth 5.0, 2.4 GHz and Type-C
Battery Capacity
2500mAh
Polling Rate
  • 1000hz in Wired & 2.4G mode
  • 125hz in Bluetooth mode
N-Key Roll Over
Support
Size
329*119*30 mm
Weight
About 0.76kg
Inside the box
  • Keyboard
  • Instrusction Manual
  • Type-C Cable
  • 1*2.4G receiver
  • 1*keycap/switch puller

Reviews

There are no reviews yet.

Be the first to review “EPOMAKER TK68”

Your email address will not be published. Required fields are marked *

Translate »